Project requirement #
One audio source for two or more sales areas
Used SMART devices #
- 1 x SMARTstreamer
- any number of SMARTplayer
- any number of SMARTspeakers
Installation order #
We always recommend starting with the commissioning of the transmitting devices (SMARTstreamer and SMARTplayer) and afterwards installing and pairing the corresponding receiving devices (SMARTspeaker) in groups.
Integrate SMARTstreamer into local network #
Connect the SMARTstreamer to your local network using the supplied network cable and check that the blue LED flashes first and then lights up continuously. The SMARTstreamer is now successfully registered in the network. Start the audio source and check that the orange LED lights up continuously. The SMARTstreamer sends the music to the network on CHANNEL 1.
Set up multiple SMARTplayers #
Power the first SMARTplayer, connect it to your network and start the NewTec SMART WebApp with any browser. Rename the first SMARTplayer (e.g. first floor). Connect the second SMARTplayer, connect it to your network and it will automatically appear as “SMARTplayer” in the WebApp. Rename the second SMARTplayer (e.g. second floor). Repeat the process accordingly with each SMARTplayer. Using the WebApp, you can now select CHANNEL 1 as the source on the SMARTplayers in LIVE mode.
Create Groups #
Before you install the loudspeakers, it is best to create all groups (e.g. entrance, cash desk, general) for each SMARTplayer (e.g. ground floor, first floor). Then put the SMARTplayer (e.g. on the first floor) into pairing mode and mount the loudspeakers “in groups” by only installing the respective loudspeakers in a group and then immediately assigning them to the relevant group in the WebApp.